Würth SWS 12-125-T SOLID Traduction Des Instructions De Service D'origine page 20

Technical Data
Art.
Rated power consumption
Power output
Idle speed
Grinding wheel dia., max.
Spindle thread
Length of grinding spindle
Restarting protection
Electronic speed control
Overload protection
Soft starter
Quickly adjustable safety hood
Anti-vibration handle
Recoil cut-out
Dead man function
Engine brake (standstill <2 sec.)
max. permissible thickness of
attachment in clamping area
when using a clamping nut
Roughing wheel/cut-off wheel:
Max. permissible thickness of
attachment
Weight without mains lead
Protection class
Symbols on the name plate:
n = max. no-load speed
∼ = Alternating current
Risk of severe injuries.
For safety reasons, two-hole nuts must
Â
not be used on this machine.
Use quick-clamping nuts (Q-Nut) [12]
¾
20
5707 004 5
W 1,250
W
rpm 11,000
mm
mm
mm
mm
mm
kg
CAUTION !
Noise /vibration information
780
125
M14
20
Noise emission values
ü
These values enable the estimating of the noise
emissions of the power tool and comparison with
ü
various power tools. Dependent on the conditions
ü
of use, state of the power tool or attachments, the
actual loading may be greater or smaller. When
ü
estimating also take into consideration work breaks
ü
and phases with lower loading. Specify protective or
ü
organisational measures for the user based on the
appropriately adjusted estimation values.
ü
ü
Art.
ü
a /K *
6.8 h, SG h, SG
a /K *
h, DS h, DS
L /K
pA pA
6.8
L /K
WA WA
Vibration total value (vector sum in three directions)
measured in accordance with EN 60745:
2.4
a , = Vibration emission value (surface grinding)
/II
h SG
a , = Vibration emission value (grinding with grinding disc)
h DS
K = Uncertainty (vibration)
h, SG/DS
Typical A-rated sound pressure level:
L = Sound pressure level
pA
L = Sound power level
WA
K ,K = Uncertainty
pA WA
* The specified vibration emission values:
• Were measured using a standardised test method
and can be used to compare one electric tool
with another.
• Can be used for a rough assessment of the
exposure.
WARNING !
The noise level may exceed 80 dB (A)
during work.
Risk of severe injuries and acoustic
Â
trauma.
Wear ear protectors!
¾
m/s
2
m/s
2
dB (A)
dB (A)
5707 004 5
4.0/1.5
3.0/1.5
93/3
104/3