Operation; Rotary Switch (5) - VOLTCRAFT VC185 TRMS Notice D'emploi

nF Farad (unit of capacitance), nano-farad (exp. -9)
% Percent symbol
ºC / ºF Units of temperature (Celsius and Fahrenheit)
OL Overflow display, the measuring range exceeded
Measuring function of the contact-free AC voltage recognition
ErrE Error message for internal error
Symbols on the device
SELECT Symbol for the SELECT button
Symbol for the HOLD and backlight functions
Symbol for the LED lamp function
OFF Switch position "OFF"
Switch position for AC voltage measurement
Switch position for DC voltage measurement
Switch position for resistance, capacitance and continuity testing (with acoustic)
Switch position for temperature measurement
Switch position for frequency and duty ratio measurement
Switch position for current measurement (μA)
Switch position for current measurement (mA)
Switch position for current measurement (A)
Switch position for non-contact AC voltage measurement
Symbol indicating the location of the integrated sensor for contact-free AC voltage detection.

9. Operation

The multimeter indicates measured values on the digital LC display (4).
The measuring value LC display (4) of the VC185 digital multimeter spans 6000 counts (count = smallest display
value). The measuring device can be used for professional applications especially in the electronics industry (up to
CAT III 600 V). For better readability, the digital multimeter may also be positioned with the foldable stand (7) on the
rear side in an upright position on tables, or work benches.
a) Rotary switch (5)
The major measuring functions are selected via a rotary switch (5). When
the rotary switch (5) is set to a measuring function, it is turned "ON". If the
multimeter switch is set to "OFF", the meter is switched off. Always turn the
meter off when it is not in use. Select between the sub-functions using the
SELECT button (1).
38