Commissioning; Measuring Operation Multimeter - VOLTCRAFT ST-100 Notice D'emploi

8. COMMISSIONING

Before working with the meter, you have to insert the enclosed batteries.
Insert the batteries as described in the chapter "Cleaning and Maintenance".
The individual measurement functions can be set via the dial switch. The meter is off when set
to "OFF".
The set fi nder may be used independently of the dial switch. It is not galvanically connected to
the multimeter.

9. MEASURING OPERATION MULTIMETER

Do not exceed the maximum permitted input values. Do not touch any circuits
or parts of circuits if they may be subject to voltages higher than 50 V/ACrms
or 75 V/DC! Danger to life! Before measuring, check the connected measuring
lines for damage such as, for example, cuts, cracks or squeezing. Defective
measuring lines must no longer be used! Danger to life!
The multimeter comprises of two independent and galvanically insulated parts. For measuring
operation a the mulitmeter part, only the illustrated operating elements are required.
33