Franke SMART FHR 604 C T BK Manuel D'installation Et Mode D'emploi page 11

FHR 604 C T BK / FHR 604 C T XS / FHR 604 C T WH
Turning the hob on
Note: Unit becomes operational within
1 second after it is plugged to the mains.
All LEDs and displays illuminate for 1 second.
Unit is turned on by pressing the
The icon is displayed on all displays
(see Fig. 1).
Figure 1
If the temperature of the glass over the cooking
zones is above + 60°C,
are displayed on the display of the relevant
successively. ( = 0.5 seconds,
= 0.5 seconds) (see Fig. 2).
Figure 2
Turning the hob off
Unit is turned off by pressing the
(see Fig. 3). You may turn off the unit by pressing
the key even if the child lock is active.
Figure 3
key.
and icons
key
– 11 –
WARNING: Electronic components remain
active for 20 seconds. If there is no cooking
level within this period, unit switches to
''off mode'' automatically with a signalling
sound.
Residual Heat Display
If the icon on the display of the hob is
illuminated, this means that the relevant
cooking zone is still hot. It may be used for
heating a small amount of food (see Fig. 4).
Figure 4
WARNING: Residual heat display is not
illuminated, and thus it does not warn the user
against heat in case of a power outage.
WARNING: Residual heat display of each
cooking area remains active until the measured
glass temperature is below + 60 °C.
Turning the hob cooking areas on
1. Turn the hob on by pressing the
(see Fig. 5).
Figure 5
EN
button