TFA BOXX2 Mode D'emploi page 22

TFA_No. 60.2562.01GB_Anleitung 18.08.2021
BOXX2 – Radio-controlled alarm clock with indoor climate
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Turn off the device if you do not use it for a long period of time. Slide the POWER ON/OFF switch to OFF.
Warning: The alarm settings are not saved.
• Store the device in a dry place.
11. Troubleshooting
Problem Solution
➜ Slide the POWER ON/OFF switch to ON
No display on the device
➜ Charge the device via micro-USB cable
➜ Press and hold the ▼ button to activate the reception
No DCF reception
➜ Wait for an attempt reception during the night
➜ Choose another place for your device
➜ Set the clock manually
➜ Check if there is any source of interference.
➜ Restart the instrument according to the manual
16:57 Uhr Seite 22
– 42 –
BOXX2 – Radio-controlled alarm clock with indoor climate
➜ Slide the ALARM switches 1 and 2 forwards
Alarm clock does not ring
➜ Activate the alarm for the day of the week
(see Activation of the alarm time for the days of the week))
If your device fails to work despite these measures, contact the retailer where you purchased the product.
12. Waste disposal
This product and its packaging have been manufactured using high-grade materials and components which can be recycled
and reused. This reduces waste and protects the environment.
Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.
Disposal of the electrical device
Caution! This device contains a built-in battery that cannot be removed without damaging the housing.
Improper removal represents a safety risk. Hand in the device unopened at the collection point; the device and
battery will be disposed of properly.
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive
(WEEE).
– 43 –