Panasonic Palmcorder PV-A20-K Manuel D'utilisation page 4

Supplying Power
Charge the Battery Pack
Charge the Battery Pack fully
before operation.
POWER
Lamp
CHARGE
Lamp
A
B
(Top View)
1
Plug in the AC Adaptor.
POWER Lamp lights up.
2
Insert the Battery.
A
Align left side of Battery with left edge
of AC Adaptor.
B
Press Battery down and slide in
direction of arrow.
The CHARGE Lamp flashes, then stays
lit when charging is complete.
APPROXIMATE CHARGING TIME:
PV-BP18-K
PV-BP15-K
HHR-V20
HHR-V40
HHR-V60
3
Remove the Battery.
Slide the Battery to the left and lift off.
• The useful operation time of the Battery
will gradually decrease after repeated use
and recharging. The Battery is no longer
serviceable if the operation time is very
short, even after a sufficient charge.
Note:
• While the DC Power Cable (supplied) is
connected to the AC Adaptor, the Battery
cannot be charged.
• After charging the Battery Pack 5 times,
use the BATTERY REFRESH feature as
explained on page 5.
One and one half hours
One hour
One and one half hours
Three and one half hours
Five hours
4