Gewiss JOINON Manuel D'installation Et Usage page 57

Preparation for device installation
Install the charging station in the prepared area, maintaining the necessary distance between it and the surrounding area (as shown
in the figure).
The charging column can be installed in back-to-back configuration with another column, to make the best use of the space available.
This particular configuration requires only one power supply line and a single plinth for the installation of two devices, as shown below:
There must be a minimum distance of 2cm between the back panels of the two charging units.
NB: the surface on which the charging station is to be installed must be designed and built in accordance with the standards and
the regulations in force, to ensure the safety of users regardless of the type of surface.
7.55.4.515.2 - Installation and Operation Manual Installation and Operation Manual
BACK
5 cm
50 cm
30 cm
FRONT
FRONT
2 cm
FRONT
50 cm
Gewiss
IT
EN
FR
ES
DE
RO
HU
NL
57