Gewiss JOINON Manuel D'installation Et Usage page 67

Device installation and connection
3. Check that the device is correctly fixed in place;
4. Remove the protective film from the front panel;
To make the electrical connection, insert the power supply cables in the device. The charging station is wired by connecting the
single-phase or three-phase cables inserted in the cable glands. The appropriate cable glands are M25 and M32 for the power cables
(highlighted in yellow), and M16 for the data cables (highlighted in red).
Depending on the charging unit version, the cable glands and caps supplied are as follows:
Version
Single-phase 7.4 kW
Three-phase 11 kW
Three-phase 22 kW
NB: whatever the type of installation, it's important that the socket-outlet is assembled at a height between 70 and 120cm.
7.55.4.515.2 - Installation and Operation Manual Installation and Operation Manual
Cable glands supplied
2x M25
2x M25
2x M32
KO
120cm
OK
70cm
KO
Gewiss
Caps supplied
2x M32
2x M32
2x M25
IT
EN
FR
ES
DE
RO
HU
NL
67