Gewiss
1. Information about this manual
1.1. Field of application
This manual applies for the following charging stations:
JOINON Column - Stand-Alone version with Autostart
JOINON Column - Stand-Alone version with RFID recharge activation
JOINON Column - Stand-Alone version with Restart and RFID recharge activation
JOINON Column - OCPP cloud version with 4G router
JOINON WallBox - Stand-Alone version with Autostart
JOINON WallBox - Stand-Alone version with RFID recharge activation
JOINON WallBox - OCPP cloud version with 4G router
1.2. Target readers
This document is intended for qualified personnel.
When this manual refers to qualified personnel, this means personnel complying with all the standards, directives and laws concerning
safety, as applicable to the installation and operation of this device.
The selection of qualified personnel is always the responsibility of the company that carries out the work, which is the only party that
can decide whether a worker is capable of doing a certain job, thereby ensuring their safety and respecting the applicable law with
regards safety in the workplace.
These companies must provide suitable training regarding the electrical devices for their personnel, and make sure they become
familiar with the content of this manual.
1.3. Symbols
This manual uses various symbols to stress and highlight certain information. Their general meaning is indicated below.
General caution.
Electric risk.
Prohibition.
48
Information about this manual
General information.
Refer to the indicated section.
7.55.4.515.2 - Installation and Operation Manual