Planika FLA3 Notice De Montage page 17

DEVICE HIT
DEVICE TILTED
CO2 LEVEL TOO HIGH
WARNING CLOSE THE LID
CHECK THE TANK WIRE
CONNECTION
ERROR 01
ERROR 05
ERROR 06/16/17/20
ERROR 15
ERROR 21
ERROR
02/03/04/10/16/31/32/41/51/61
FUEL
Use only fuels consisting of
viscous fuels or fuels of improper electric conductivity. The values must be compliant with those of FANOLA
such as dehydrated ethanol (i.e. consisting of more than 96,6% by volume ethanol) will cause a device error and loss of the
guarantee. Fuels consisting of 100% by volume ethanol will damage the device.
CLEANING –
Clean with a damp cloth and delicate detergents, only when the device is turned off and cooled.
SERVICE –
(keep the provided USB cable for servicing purposes) We are available on live chat at
www.planikafires.com/service
Ventilate the room to reduce the CO
Disconnect the fuel tank wires and connect them again. (FLA 3 XL)
Fuel spillage has been detected. Turn the device OFF by pressing
the pump. Wipe the visible liquid and wait for min. 1 hour. If the error is not eliminated,
The device has been moved. Eliminate the source of shock. Wait for READY.
Turn the device OFF
Turn the device OFF
95-96,6% ethanol by volume. FANOLA
BRENNSTOFFNACHFÜLLEN
Do not fill the fuel. Close the fuel inlet lid.
wait for min. 24 hours.
, wait for min. 5 minutes and turn the device ON.
and level the surface on which the device is installed.
Turn the device OFF and ON. Wait for READY.
Contact the Service Department.
®
is the recommended fuel. Do not use gel, thick and
17
level. Wait for READY.
2
and disconnect
®
. Other fuels,