Removing The Module - Lowenstein Medical prisma2CLOUD Mode D'emploi

4 Preparation and operation

4.2 Removing the module

Requirement:
Result
36 EN prisma2CLOUD
There is no data communication underway.
1. Press the unlocking button on the module.
prismaLINE (WM 100 TD)
prismaVENT (WM 110 TD, WM 120 TD)
2. Remove the module sideways from the therapy device.
3. Close the system interface cover on the therapy device again.
The module is removed.
The symbol disappears from the therapy device display.