Customising The Screen; Changing The Date And Time; Device And Data Management - Crosscall CORE-X3 Mode D'emploi

• The screen automatically locks and goes into sleep mode after being idle for a period
of time, to reduce power consumption and prevent unintended actions. To change the
screen timeout, go to Settings > Display > Sleep, and select a duration.
Unlocking the screen
Press the on/off button to turn the screen back on and swipe in any direction.

CUSTOMISING THE SCREEN

1. Touch and hold an empty area of the screen to access the home screen editor.
2. Select WALLPAPERS and WIDGETS to customise your screen.
3. To delete a widget, press and hold the widget you want to delete."Delete" will appear
at the top of the screen. Then, drag the widget to "delete".

CHANGING THE DATE AND TIME

Go to Settings > Date and time.
• Enable Automatic time zone to allow the network time zone.
• Select Use 24-hour format to use the 24-hour clock.

DEVICE AND DATA MANAGEMENT

Data transfer
Do not disconnect the USB cable from the device when transferring data. This could
result in loss of data or damage to the device.
1. Using a USB cable, connect your device to a computer.
2. Open the notification panel, then tap Device connected in charging mode > Transfer
files. Press Transfer photos (PTP) if your computer does not support the Media Transfer
Protocol (MTP) format.
3. Transfer the files between your device and your computer. A message will appear
on your computer screen. Follow the instructions on screen to transfer your photos/
videos, etc.
Factory reset
Delete all settings and data on the device.
Before performing a factory reset, be sure to back up any important data stored on
the device. On the Apps screen, tap Settings > Backup and reset > Restore factory
settings > RESET PHONE > CLEAR ALL. The device will restart automatically.
17