Crosscall CORE-X3 Mode D'emploi page 24

Masquer les pouces Voir aussi pour CORE-X3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
• Be sure to back up your important data. A repair or other factors may lead to data loss.
• Do not disconnect the phone when transferring files or formatting the memory. This
could cause program failure or file damage.
• Keep the phone and charger out of the reach of children. Do not let children use the
phone or charger unattended.
• Keep small phone accessories out of reach of children in order to avoid choking.
• Do not let your children or pets chew or lick the device.
• Do not modify or recondition your phone.
• Do not expose your phone to flames, explosions, or other sources of danger.
• Please switch off your phone when you are near explosive materials or liquids.
• The phone must only be connected to a USB 2.0 interface.
• The ideal operating temperature is between 0°C and 40°C. The ideal temperature for
storage is between 20°C and 50°C.
• Stop using your device if any of its parts are cracked, broken, or if it overheats.
• Do not press your device against your eyes, ears or any other part of your body, and do
not put it in your mouth.
• Do not use the flash near the eyes of people or animals.
• Only use the original accessories for this phone and do not install its battery in another
phone.
INFORMATION ON WATER RESISTANCE
• You have just bought an IP68 compliant mobile phone. In order to guarantee optimal
use and water resistance, ensure that all the flaps and plugs on the openings and the
cover are correctly sealed.
• Do not open the back cover of the device if it is in the water or in a very humid environment.
• The rubber seal fixed on the back cover is an important component of the device. Make
sure that the rubber seal is not damaged when you open or close the cover. Make sure
that the seal is free from any debris, such as sand or dust, to avoid damaging the device.
• The cover and the flaps covering the openings may come loose in the event of a fall or
impact.
• Make sure that all the covers are properly aligned and completely closed.
24

Publicité

Table des Matières
loading

Table des Matières