Error Messages; Service, Maintenance, Disposal; Cleaning; Service, Maintenance - KERN MBE 20K10 Mode D'emploi

9 Error messages

EE: No possibility of displaying the weighing value. It occurs e.g. when a
weight is removed after finishing the automatic taring.
Remove a weight, switch off the scale and switch it on again.

10 Service, maintenance, disposal

10.1 Cleaning

Do not use aggressive cleaning agents (solvents or similar agents), but a cloth
dampened with mild soap suds or cleaning agent. Ensure that no liquid penetrates
into the device and wipe the device with a dry soft cloth.
Loose impurities can be removed carefully by using a brush or hand vacuum cleaner.
Do not tilt or turn the scale to carry out its cleaning because this may result in the
scale damage.
Remove any impurities immediately.

10.2 Service, maintenance

The device may only be operated and maintained by trained service technicians who
are authorised by KERN.

10.3 Disposal

Disposal of packaging and device must be carried out by an operator according to
valid national or regional law of the location where the device is used.
MBE-BA-e-1612 11