Unpacking; Scale Positioning; List Of Items Delivered; Battery Operation (Inserting And Removing Batteries) - KERN MBE 20K10 Mode D'emploi

6.2 Unpacking

Carefully remove individual scale parts or the whole scale from its packaging and
position the scale in its intended working location. When the mains adapter is used,
be careful not to cause the danger of falling over the power cable.

6.2.1 Scale positioning

Pay attention that the scale plate is precisely levelled.

6.2.2 List of items delivered

Standard accessories:
• Operating Instructions
• Batteries (4 x AA 1.5 V)

6.3 Battery operation (inserting and removing batteries)

The battery compartment is located in the scale bottom.
Turn the scale and remove the battery compartment cover. Insert batteries according
to polarity (pay attention to the marking in the battery compartment bottom).
Close the battery compartment and turn the scale again.
When the batteries are exhausted, the display will show the „LO" symbol and batter-
ies must be changed.
When the scale is not in use for a longer period of time, remove the batteries and
keep them separately. Leakage of battery liquid might damage the scale.

6.4 Initial start-up

To achieve accurate weighing results with the electronic balances, the appropriate
operating temperature must be provided for them (refer to „Warm-up time", chapter
1). During the warm-up time, the scale must be switched on.
The accuracy of the scale depends on the local acceleration of the fall.
Please be sure to observe the information included in the chapter on „Adjustment".
8 MBE-BA-e-1612