Controllable Functions - Trix H0 24126 Manuel D'instructions

Programming
• The characteristics can be changed repeatedly using the
Configuration Variables (CV).
• The CV numbers and the CV values are entered directly.
• The CVs can be read and programmed repeatedly. (Pro-
gramming is done on the programming track.)
• The CVs can be programmed, as you desire. PoM (Pro-
gramming on the layout track) is only possible with those
CVs marked in the CV table. PoM must be supported
by your central controller (see the instructions for your
controller).
• The default settings (factory settings) can be produced
repeatedly.
• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
12

Controllable Functions

Work lights / Headlights
Smoke generator
Sound effect: Rotary plow blades
Sound effect: Stream engine
Choose between work lights and
headlights
Sound effect: Long whistle blast
1 Trix Systems
F0
F1
F2
F3
F4
F5