Threading Preparations / Tips - JUKI MO-2800 Manuel D'instructions

Threading preparations / Tips

1. Extend the retractable support rod fitted with open thread guide as far as it goes.
2. Raise the presser foot. (Tension disk opens.)
3. Open the looper cover.
4. Turn the power on.
Threading sequence
The thread guides can be threaded in any sequence.
The threading sections are color coded correspondingly.
Lower looper thread (red markings)
Upper looper thread (purple markings)
Right needle thread (green markings)
Left needle thread (beige markings)
Threading the thread guide No. 1
Bring down the thread you have put on the retractable support rod
and fit it in the thread guide No. 1 until you hear a click.
Bring the thread toward you along the groove.
18