glasses, protective gloves, and a breathing mask
conforming to protection class FFP3.
•
Long-term exposure to noise can result in permanent
hearing impairment. Always use approved hearing
protection. Listen for warning signals or shouts when
you wearing hearing protection. Always remove your
hearing protection as soon as the engine stops.
•
Use approved protective gloves when you do
maintenance on the product.
•
Use tight-fitting, heavy-duty and comfortable clothing
that permits full freedom of movement. Do not wear
shorts.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
Introduction
CAUTION:
with correct rated value for this product. Only
connect to an outlet that is correct grounded.
CAUTION:
before change of bag collection system.
General
Do a check that the following accessories are included:
Extension cables
WARNING:
that can handle the machines rated current
with corresponding plugs.
Model
Distri-
bution
box
T7500
NO
230V
T7500
YES
230V DIST
T8600
YES
480V
966 - 003 - 11.04.2022
Read the warning
Only use extension cable
Always clean the prefilter
Only use an extension cord
A
B
C
1
1
1
•
Make sure the engine switch is in the Off position.
Disconnect the product from the wall outlet.
•
Do not modify the product from its original design.
•
All repairs must be performed by a qualified
service person. Use only manufacturer-supplied or
equivalent replacement parts.
•
Make sure that you use correct fuse when you do
servicing on the product.
•
Use approved protective equipment. Refer to
Personal protective equipment on page 10
•
Do not make a hole in the Hepa filter. A broken Hepa
filter can disperse dust.
Assembly
•
The hose with end fittings
•
Steel tube
•
Floor Nozzle
•
Cable ties
If 1 of the parts is missing, speak to your local Pullman
Ermator service agent .
Make sure to dispose the package and the used product
components in correct procedure. Refer to local disposal
regulations. Make sure to recycle.
Accessories
Approved for machines > 250V: SO, SOO, ST, STOand
STOO
Approved for machines < 250 V: All types
D
E
1
1
F
G
H
1
11