Rollerblind PrecisionRise
A
NOTICE!
Damage hazard
• Blinds should be stowed completely when boat or vehicle is under
way.
• Use screws and plugs suitable for the wall construction to fix the blind.
• Ensure that you do not drill through the wall.
• Ensure that your hands are clean or wear suitable gloves to avoid mark-
ing the fabric.
3
Scope of delivery
See MP or CA leaflets respectively:
Item in
Quantity
fig. 1
1
2
depending
on blind size
3
4
4
Intended use
The blind is suitable for:
• Installation in yachts and boats
• Installation in caravans and motor homes
• Installation in homes
The design and size of the blinds are custom-made. The fabric of the blinds is cut to
fit the customer's specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other locations with a high level of humidity.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
EN
Description
1
Blind unit
Mounting brackets
2
Bracket caps (except C3)
2
Guide wire kit (GW only)
Scope of delivery
5