Specifications - Martin Logan Sistine 4XC Mode D'emploi

s
PeCiFiCations
System Frequency Response . . . . . . . . . . . . . . .
Tweeter Dispersion (horizontal x vertical) . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency . . . . . . . . . . . . . . . . . . . . .
High-Frequency Driver . . . . . . . . . . . . . . . . . . .
Mid-Frequency Driver . . . . . . . . . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . . . . . . . . .
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suitable Amplifier Range . . . . . . . . . . . . . . . . .
Maximum Power Handling . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (diameter x depth) . . . . . . . . . . . . .
Required Opening (including tolerance) . . . . . . .
Projection From the Wall Surface . . . . . . . . . . . .
Depth Required Behind the Wall Surface . . . . . .
12
*
*Specifications are subject to change without notice.
63–25,000 Hz ± 3 dB
30° x 80°
92 dB @ 2.83 volts/meter
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
400, 2250 Hz
1.25 x 2.4" (3.2 x 6.1 cm) Folded Motion XT
Obsidian Transducer with 4.5 x 2.75" (11.4 x 7
cm) diaphragm.
Two 3.5" (8.9 cm) black unidirectional carbon
fiber multi-section cone with Nomex
and cast aluminum basket, sealed back chamber
format. Concave dust cap.
8" (20.32 cm) black unidirectional carbon fiber
multi-section cone with Nomex
aluminum basket, sealed back chamber format.
Concave dust cap.
Tweeter Level (dB): +2, –2, 0
Position: Front R/Rear L, Front L/Rear R, For center
choose either
Push style
Custom air core coil inductors, polypropylene
film capacitors in series, and low DF electrolytic
capacitors. Thermal/current protection.
20–300 watts
150 watts
13.5 lb (6.1 kg)
12.8 x 7.5" (325 x 190 mm)
11.46" (291 mm)
0.26" (7 mm)
7.2" (184 mm)
backer
®
backer and cast
®