Specifications - Martin Logan ElectroMotion FX2 Mode D'emploi

s
peCiFiCations
Frequency Response . . . . . . . . . . . . . . . . . . . . .
Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency . . . . . . . . . . . . . . . . . . . . .
High Frequency Driver . . . . . . . . . . . . . . . . . . .
Low Frequency Driver . . . . . . . . . . . . . . . . . . . .
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Amplifier Power . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . .
*Specifications are subject to change without notice.
*
MARTINLOGAN ELECTRO MOTION FX2
55–25,000 Hz ± 3 dB
160° (horizontal) x 30° (vertical)
93 dB @ 2.83 volts/ meter
5 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
2,300 Hz
Two 1.25" x 2.4" (3.16cm x 6.1cm) Folded
Motion Transducers with 4.5" x 2.75" (11.4 x
6.98cm) diaphragm.
6.5" (16.51cm) paper cone with cast-aluminum
basket. Non-resonant asymmetrical chamber
format.
Two bass-reflex ports
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Tweeter thermal/current
protection.
20–200 watts
Push style with banana jacks
16 lbs. (7.3 kg)
14.9" x 14" x 6.8"
(37.9cm x 35.5cm x 17.2cm)
9