Specifications - Martin Logan MOTION FX Guide De L'utilisateur

s
peCiFiCations
Frequency Response . . . . . . . . . . . . . . . . . . . . .
Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency . . . . . . . . . . . . . . . . . . . . .
High Frequency Driver . . . . . . . . . . . . . . . . . . .
Low Frequency Driver . . . . . . . . . . . . . . . . . . . .
Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Amplifier Power . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (HxWxD) . . . . . . . . . . . . . . . . . . . .
*Specifications are subject to change without notice.
*
MARTINLOGAN MOTION FX
74–25,000 Hz ± 3 dB
160° x 80°
91 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
4,500 Hz
Two 1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducers with 5.25" x 1.75" (13.3cm x
4.4cm) diaphragm.
5.25" (13.3cm) paper cone with cast aluminum
basket. Non-resonant asymmetrical chamber
format.
Folded Motion bass-reflex port
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–160 watts
Push style with banana jacks
9.5 lbs. (4.4 kg)
11.1" x 12" x 6"
(28.2cm x 30.5cm x 15.2cm)
9