Specifications - Martin Logan ElectroMotion C2 Mode D'emploi

s
peCiFiCations
Frequency.Response . . . . . . . . . . . . . . . . . . . . .
Dispersion. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover.Frequency . . . . . . . . . . . . . . . . . . . . .
High.Frequency.Driver. . . . . . . . . . . . . . . . . . . .
Low.Frequency.Drivers. . . . . . . . . . . . . . . . . . . .
Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended.Amplifier.Power . . . . . . . . . . . . .
Binding.Post.Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions.(HxWxD). . . . . . . . . . . . . . . . . . . . .
*Specifications are subject to change without notice.
*
MARTINLOGAN.ELECTRO.MOTION.C2
55–25,000 Hz ± 3 dB
80° (horizontal) x 30° (vertical)
94 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
2,300 Hz, 900 Hz
1.27" x 2.4" (3.22cm x 6.09cm) Folded Motion
Transducer with 4.5" x 2.75" (11.4cm x 6.9cm)
diaphragm.
Two 5.25" (13.3cm) paper cone with cast-aluminum
basket. Non-resonant asymmetrical chamber format.
Ported
Custom air core coil inductors, polyester film
capacitors in series and low DF electrolytic
capacitors. Tweeter thermal/current protection.
20–250 watts
Push style with banana jacks
24.5 lbs. (11.12 kg)
6.4" x 18.9" x 14.3"
(16.4cm x 48.2cm x 36.5cm)
7