Specifications - Martin Logan Installer IC 3 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications*

System Frequency Response . . . . . . . . . . . .
Aiming. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency. . . . . . . . . . . . . . . . . .
High-Frequency Driver . . . . . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . .
Suitable Amplifier Range . . . . . . . . . . . . . .
Maximum Power Handling . . . . . . . . . . . . .
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (dia. x depth) . . . . . . . . . . . . .
Required opening . . . . . . . . . . . . . . . . . . . . . .
Projection from wall surface . . . . . . . . . . . .
Depth required behind wall surface. . . . . . .
*Specifications are subject to change
without notice.
16
IC3
100–20,000 Hz ±3 dB
N/A
88dB
Compatible with 8 ohms
1,800 Hz
0.75" (1.9cm) titanium domes
3.5" (8.9cm) mineral-filled polypropylene cone
Push style accommodates wire up to 12AWG
15–100 Watts
60 Watts
1.2 lbs. each (0.5 kg)
4.1" x 4.17" (10.4 x 10.6cm)
3-3/4" (9.5cm) diameter
0.25" (0.6cm)
3.92" (9.9cm)
Ø4.1" (10.4cm)
Ø3.62" (9.2cm)
4.17" (10.6cm)
3.92" (9.9 cm)

Publicité

Chapitres

Table des Matières
loading

Table des Matières