Functions Overview; Charger Basic Settings - XciteRC X-PERT X90T Mode D'emploi

Functions overview · Charger basic settings

Functions overview

Press the arrow keys  or  to switch between the battery memories. Pressing the icons starts the appro-
priate mode.
LS> LiPo CHG
BCHG
SET
Select battery memory
1)
L S> LiPo C H G
2)
6S 2.2A
:
Mode Balancer charge - for Lithium batteries 2-6S
3)
BCHG
Mode Charge - for 1S Li- or NiCd- / NiMH- / Pb-Akkus, do not use for 2-6S Li-batteries!
4)
CHG
Mode Discharge
5)
DCHG
Mode Cycle
6)
CYCLE
Settings
7)
SET
Ω
Shows single-cell voltage and internal resistance
8)
BATT
Mode USB / Servo test
9)
MISC
Mode Power supply
10)
POWER
* LS: last setting
WARNING: Select the correct cell type (eg. Ni-MH or Li-Po) before the start of the charging process.
Never charge with incorrectly set cell type. Check the maximum charge current specified by the manufacturer
of the battery - fire hazard!

Charger basic settings

Please set up the USER Setup correctly before the first use.
U S E R S E T U P (1/5)
Back Light
LCD Contrast
Button Sound
Buzzer Sound
Max Out Watt
BACK
save and back
U S E R S E T U P (2/5)
Input Cut
X-pert Charger X90T Safety Timer
6S 2.2A
CHG DCHG CYCLE
Ω
BATT MISC POWER
Shows battery memory data
:
80%
:
40
:
ON
:
ON
:
80W
NEXT
:
10.0V
:
240min
Parameter
LED Background light
LCD Contrast
Button sound
Buzzer sound
Max. Output power
increase value
decrease value
Input low voltage cut-off
Safety timer
20 - 80%
30 - 60
on / off
on / off
80 - 80 W
10.0 - 18.0 V
10 - 600 min.
EN
23