Using The Charger For The First Time - XciteRC X-PERT X90T Mode D'emploi

EN
WARNING: Use only batteries with XH balancer plugs. Never try to connect other plug types with the
charger! The plug or charger may damage or worse, the battery catches fire or explodes! If necces-
esy, use a suitable adapter cable.
EH / PQ / TP

Using the charger for the first time

Connect the included power cord to the charger, then connect the charger to an electrical outlet with 100-
240 V AC. Or connect the charger via the cable with the yellow XT60 connector to a 12 V car battery or a
power supply with 11-18 V DC and min. 150 W power output.
WARNING: Connect only one input at the same time, never plug an AC voltage to the 12 V DC input
or a DC voltage to the 100 - 240 V AC - fire hazard!
Battery
type
NiCd/NiMH
Li-Ion
LiPo
LiFe
Pb
The charger is controlled via the large touch screen. Press briefly with a finger on the desired field in the
screen to activate the corresponding function.
22
XH
XH
Voltage per cell
1.2 V
3.6 V (or 3.7 V - check
battery sticker!)
3.7 V
3.3 V
2.0 V
Using the charger for the first time
End of charging Fast
voltage per cell charge
1 - 2 C
4.1 V (4.2 V) max.
1 C
4.2 V 1 - 2 C
3.6 V 1 - 4 C
2.46 V 1 C
-
+
End point voltage per cell
NiCd: 0.85 V - NiMH: 1.0 V
2.5 V
3.0 V
2.0 V
1.75 V
X-pert Charger X90T