Mode Servo Test - USB · Power Supply Mode
Modes Servo test - USB
in this mode, a servo or aan electronical speed controller attached to the servo jack could be tested. The USB
monitor displays the current parameters of a connected USB device.
SERVO/ESC USB Monitor
SERVO
USB
BACK
- USB MONITOR -
:
Voltage
4.98V
:
Current
0.00A
:
Capacity
0.00AH
:
Out Watt
:
0.00W
:
Run Time
00:00:13
BACK
- OUT PPM SETTING -
:
MAX OUT PPM
MIN
OUT PPM
:
- CURRENT OUT PPM -
1500us
BACK
Power Supply Mode
in this mode the charger provides an output power of 3 - 12 V DC for electronic equipment.
D I G I TA L P O W E R S E T T I N G
:
Out Volt.
:
Current
:
Max. Watt
:
Run Time
:
BACK
DIGITAL POWER WORKING
:
Input Volt
:
OUT Volt
:
OUT Curr
:
OUT Watt
:
:
Run Time
STOP
The arrow keys change the values, not the function.
X-pert Charger X90T
Menu:
- USB monitor
- Servo test
USB monitor
displays the current parameters
of a connected USB device
Servo test
2100
the Servo position can be controlled
900
with the arrow keys.
The neutral point is normally at
1500µs
AUTO
Power supply mode
12.0V
Settings: voltage
5.0A
80W
240Min
START
12.52V
Power supply mode
24.60V
0.00A
Display during operation
0.00W
00:00:13
current
max. power
runtime
EN
29