INPUT L:
Recording automatically starts when the input level exceeds about ‐
18dB after you press the Record button. Input audio of one second in
duration prior to the recording start point will also be recorded.
INPUT H:
Recording automatically starts when the input level exceeds about ‐
6dB after you press the Record button. Input audio of one second in
duration prior to the recording start point will also be recorded.
200ms:
Recording starts about 200 ms after you press the Record button. Select
this option if you want to prevent the noise generated by pressing the
Record button (if any) from being recorded.
COUNT IN
The parameter options vary depending on the
MODE parameter page setting in the TIME cate‐
gory (see page 32). This parameter setting is
effective only when the AT START parameter is
set to OFF and when recording starts while the
unit is stopped.
When MODE is set to HMS:
OFF: Recording and playback start at the same time.
1–10SEC:
Playback starts prior to the start of recording by a specified time.
When MODE is set to MBQ:
OFF: Recording and playback start at the same time.
1MEAS:
Playback starts from one measure before the current time position.
2MEAS:
Playback starts from two measures before the current time position.
UNDOTIME
If the number of Undo times is high, more space
will be required on the memory card (see "Can‐
celing recording (Undo/Redo)" on page 21).
1TIME, 10TIMES:
You can undo or redo once or ten times.
INFINITY:
You can undo or redo as many times as space on
the memory card allows.
31