Rec - Korg Rems SOUND on SOUND Manuel D'utilisation

N·GATE
Set this parameter to ON to activate the noise
gate and cut low level signals.
This option is available only when the LVL
CTRL parameter is set to AUTO.
MIC GAIN
LOW: Select this option when you record loud
sounds (such as band performances).
MID: This option sets the gain to a level between
LOW and HIGH.
HIGH: Select this option when you record low
level audio (such as conference meetings).
You can set the MIC GAIN parameter when
you record through the built‐in microphone
or an external microphone connected to the
MIC jack. However, this parameter is
unavailable when you are recording via the
LINE or GUITAR IN jack.
P·IN·PWR
Activating P‐IN‐PWR supplies power to the MIC
jack. If this parameter is set to ON, be sure to
connect a condenser‐type microphone that sup‐
ports Plug‐In‐Power. If you connect another type
of microphone (such as a dynamic microphone
or a microphone with a built‐in battery), the
microphone may be damaged.

REC

In this category, you can adjust various settings for recording.
AT START
You can specify a time interval between pressing
the Record button and the start of recording. You
can also set the recorder so that it will start record‐
ing when a specified level of signal is input.
OFF:
Recording starts immediately when you press
the Record button.
30