The 'audio' tab for Teranex Mini Audio to SDI 12G contains
the following settings.
Audio Input menu
This menu allows you to select between RCA, XLR, and
optical inputs.
If you have selected XLR, you can further select between
analog, AES/EBU, and timecode inputs.
Selecting AES/EBU allows the additional option of checking
'sample rate conversion.' When this is selected, the sample
rate of your SDI audio output will be forced to 48kHz, the
correct sample rate for television.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel
on your Audio to SDI 12G converter, the following menus
will be available - 'audio,' and 'network.' The settings
available in these menus are identical to those detailed in
the 'Blackmagic Teranex Setup settings' section above.
Teranex Mini Audio to SDI 12G Block Diagram
Input automatically
detects between
SD/HD/6G/12G-SDI
SDI In
Central Processor
USB
and Firmware
Ethernet
Mini Switches
with Power
The audio input menu also allows you to chose which
channel pair, or channel quad in the case of AES/EBU audio,
of your SDI signal you wish to embed audio into, as well
as adjusting the audio gain.
You can bypass channels or channel pairs if you want to
avoid overwriting audio in your SDI signal.
Your Teranex Mini will retain its last settings whether applied
via switch, Smart Panel or Blackmagic Teranex Setup.
If reverting to switch control after removing the Smart Panel
or updating your converter's settings via software, you may
need to toggle individual switches for new settings to
take effect.
For more information on changing settings using the
Teranex Mini Smart Panel, refer to the 'changing settings
section in this manual.
Using Teranex Mini Smart Panel gives you access
to the same settings as Blackmagic Teranex Setup.
Serializer and
SDI Cable Driver
Equalizer,
SDI Audio
Re-Clocker and
Embedder
10 bit De-Serializer
33
Analog or AES/EBU
Analog or AES/EBU
AES/EBU
Audio Sample Rate
Converter
Analog
Stereo Audio
Analog to Digital
Converter
Digital
Embedded
SDI Out
Ch 1 Analog or
Ch 1&2 AES/EBU
Ch 2 Analog or
Ch 3&4 AES/EBU
or Timecode
L
Stereo In
R
Optical In