Install Eisbaer Pro Aurora; Prepare Cpu Cooler; Prepare Cpu - Alphacool Eisbaer Pro Aurora 240 CPU AIO Mode D'emploi

EISBAER PRO AURORA

INSTALL EISBAER PRO AURORA

PREPARE CPU COOLER

Remove the protective film on the cooler base:
Use the Fillport outlet if you want to refill the Eisbaer Pro using the supplied fillport.

PREPARE CPU

After you have disassembled your old cooler, first clean the hardware:
•
Remove residues of the thermal paste from the CPU.
•
Use a cloth or cotton swabs to help. With isopropanol alcohol, you can also remove
dried heat-conducting paste.
•
Apply a pea-sized blob of thermal paste to the CPU.
•
Spread the paste with the aid of a plastic strip or similar to form an even, thin layer
(< 0.5 mm layer thickness).
Use the screw plug tool.
26
Alphacool International GmbH