BWT Rondomat Duo-TW 2 Mode D'emploi page 34

GB GB GB
GB GB
Liter Liter Liter Liter Liter
IN IN IN IN IN 25 25 25 25 25
OUT 0 0 0 0 0 OUT OUT
OUT OUT
Note! Do not change 0! Note! Do not change 0! Note! Do not change 0! Note! Do not change 0! Note! Do not change 0!
NaCL
NaCL
00 : 17 : 35
34 34 34 34 34
CaCo3 CaCo3 CaCo3 CaCo3 CaCo3
CaCo3 CaCo3 CaCo3 CaCo3 CaCo3
CaCo3 CaCo3
CaCo3 CaCo3 CaCo3
H O
2
NaCL
Setting the hardness of water Setting the hardness of water
Setting the hardness of water Setting the hardness of water Setting the hardness of water
Press the Browse Browse Browse Browse button Browse
Set the cursor to Settings Settings Settings Settings Settings
Press OK OK OK OK OK
You can make the following settings here:
Move the arrow horizontally to the required field.
The field becomes negative.
The value or the unit can be changed with the arrow up/down arrows.
The softened water supply softened water supply softened water supply softened water supply softened water supply can be displayed in liters
Water hardness can be displayed in °dH
Hardness of untreated water IN IN IN IN IN
Y Y Y Y Y ou m ou m ou m ou must set the hardness of the untreated w ou m ust set the hardness of the untreated water measured locally ust set the hardness of the untreated w ust set the hardness of the untreated w ust set the hardness of the untreated w
here. here.
here. here. here.
Hardness of blended water OUT OUT OUT OUT OUT
The 0 ma The 0 ma y not be changed here y not be changed here. . . . . The w y not be changed here
The 0 may not be changed here The 0 ma The 0 ma y not be changed here
softened to 0° dH. softened to 0° dH. softened to 0° dH. softened to 0° dH. softened to 0° dH.
The values changed are saved immediately.
Press the Browse Browse button Browse Browse Browse
Set the cursor to Manual regeneration Manual regeneration Manual regeneration Manual regeneration Manual regeneration
and press the OK OK to confirm. OK OK OK
The unit is regenerating.
You can view any procedure as a diagram with progressing time by
pressing Browse Browse Browse twice. Browse Browse
As this happens each stage of the regeneration process is dis-
played. The regeneration process lasts between 28 and 52 minutes
depending on the unit. The brine container fills up (see brine prepara-
tion)
The programming necessary for starting the unit is complete. The programming necessary for starting the unit is complete. The programming necessary for starting the unit is complete. The programming necessary for starting the unit is complete. The programming necessary for starting the unit is complete.
liters liters, m m m m m liters liters 3 3 3 3 3 or US- US- US- US- US-gallons gallons gallons gallons. gallons
°dH °dH °dH °dH, °fH °fH °fH °fH, °eH °fH °eH °eH °eH, CaCo3 (ppm) °eH CaCo3 (ppm). CaCo3 (ppm) CaCo3 (ppm) CaCo3 (ppm)
ater measured locally ater measured locally ater measured locally ater measured locally
The w The w ater meter only counts w ater meter only counts w ater
The w The water meter only counts w ater meter only counts w ater meter only counts water ater
ater
ater