AEG FAVORIT 54000 I Notice D'utilisation page 42

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

42
Select and start a washing programme
2. Set the washing programme (make sure that the appliance is in setting mode).
• The programme time flashes in the display
• The phase indicators of the set washing programme come on.
3. Press the Start button, the washing programme starts automatically.
• The phase indicators go off but the indicator of the phase in operation stays on.
Start the washing programme with delay start
1. Close the appliance door.
2. Set the washing programme (make sure that the appliance is in setting mode).
3. Press the Delay button again and again until the display shows the time of the delay
start.
• The time of the delay start flashes in the display.
4. Press the Start button, the countdown starts automatically.
• The delay start time flashes no more in the display
• The phase indicators of the set washing programme go off.
5. When the countdown is completed, the washing programme starts automatically.
• The indicator of the phase in operation comes on.
The opening of the appliance door stops the countdown. When you close the door, the
countdown continues from the point of interruption.
Cancel the delay start
If you did not press the Start button, and the countdown is not in operation
1. Press the Delay button again and again until:
• The display shows the time of the set washing programme
• The phase indicators come on.
2. Press the Start button to start the washing programme.
If you did press the Start button, and the countdown is in operation
1. Press the Delay button again and again until:
• The display shows the time of the set washing programme
• The phase indicators come on.
The washing programme starts automatically.
Interrupt the washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Cancel the washing programme
If the washing programme has not started, you can change the selection.
All manuals and user guides at all-guides.com

Publicité

Table des Matières
loading

Table des Matières