Hazards / Risks; Reference Standards; Instructions For A Correct Installation; Manufacturing And Dimensional Features - Modine ECO EVS Manuel Technique

Hazards / Risks

1. Electric shock. The model is equipped with fan
motors and, as an optional, electric defrost heaters. It
is important to use electrical safety systems that are
in compliance to the regulations in force.
2. Burns. The surface of the electric defrost heaters can
reach the temperature of 350 °C.
3. Cuts. The heat exchanger is made with fins with
sharp edges and the casing is made of sheet metal
parts.
4. Parts in motion. The model is equipped with fan
motors fitted with external protection.
5. Crushing. The weight of unit may exceed 20 kg.
Reference standards and directives
- MACHINES DIRECTIVE 2006/42/EC
- LOW-VOLTAGE DIRECTIVE 2014/35/UE
- ELECTROMAGNETIC COMPATIBILITY DIR. 2014/30/UE
- PED DIRECTIVE 2014/68/UE
- ERP DIRECTIVE 2009/125/EC
- REFRIGERATING SYSTEMS AND HEAT PUMPS UNI EN 378

Manufacturing and dimensional features

Dimensional features
435
190
32
Model EVS
EVS/B
Dimensions A
(mm) B
C
Inner coil connections In
Out (mm)
Drain connection Ø (GAS)
Net weight (ED versions) kg
(*) Use thermal expansion valve with external pressure equalizer.
50 120 min.
41 61 101
41/B 61/B 101/B
411 411 611
271 271 471
120 120 120
10 mm 10 mm 10 mm 10 mm
10 10 10
1/2 1/2 1/2
4,3 4,9 7,1

Instructions for a correct installation

Minimum distance from wall on fan motor side
During the installation phase observe the minimum distance of
120 mm from wall on fan motor side to allow adequate access to
the unit.
B
= =
A
131 201 (*) 271 (*)
131/B (*) 201/B (*) 271/B (*)
611 611 611 861
471 471 471 721
120 120 170 170
1/2 SAE 1/2 SAE 1/2 SAE
10 16 16 16
1/2 1/2 1/2 1/2
7,7 7,7 10,7 13,8
Fastening detail "F"
65
13
6 6,5
27
181 (*) 291 (*) 391 (*)
181/B (*) 291/B (*) 391/B (*)
1111 1111 1111
971 971 971
120 120 170
1/2 SAE 1/2 SAE 1/2 SAE
16 16 16
1/2 1/2 1/2
11,1 12,1 17
www.modinecoolers.com
521 (*)
521/B (*)
1461
1321
170
1/2 SAE
16
1/2
23
11