Delivery And Warranty; Foreward; Keeping And Using This Manual; Warranty - Berkel BM +32T Mode D'emploi Et D'entretien

1 - Delivery and warranty

1.1 - Foreward

ATTENTION!
The symbols used in this manual are meant to draw the reader's attention to points
and operations that can endanger the personal safety of operators or risk
damaging the machine. Do not use the machine unless you are certain that you
have correctly understood these warnings.
ATTENTION!
For greater clarity certain illustrations in this manual show the machine or parts of
it with panels or carters removed. Do not use the machine in these conditions; all
protections must be correctly fitted and in perfect working order.
This manual may not be reproduced, even partially, and its contents cannot be
used for purposes other than those permitted by the manufacturer.
Any violations of the above are punishable by law.

1.2 - Keeping and using this manual

The purpose of this manual is to instruct the user, through texts and figures, on the
warnings and essential criteria concerning transport, movement and use and
maintenance of the machine itself.
The manual must therefore be carefully read before using the machine. Keep this
manual in a safe place near the machine so that it can be easily and quickly
reached for any future reference.
If the manual should be mislaid or damaged, ask your dealer or manufacturer for a
copy.
If the machine is sold, inform the manufacturer of the name and address of the
new owner. The manual reflects the state of technology at the time the machine is
sold and cannot be considered inadequate if it is subsequently updated on the
basis of new knowledge.
For this purpose the manufacturer reserves the right to update its products and
related manuals without being obliged to update previous products and manuals
barring exceptional cases.
If in doubt, consult the nearest servicing center or the manufacturer.
The manufacturer's aim is to continuously optimize its product therefore it is
pleased to receive any comments or suggestions on improvement of the machine
and/or the manual.
The machine is delivered to the user under warranty conditions in force at the time
of purchase. Contact your supplier for any clarifications required.

1.3 - Warranty

The user is not authorized for any reason to tamper with the machine. If a fault
occurs contact the manufacturer. Any attempts at dismantling or tampering with
any part of the machine in general by the user or unauthorized personnel will bring
about the lapse of the Declaration of Conformity written according to the
Directive EEC 89/392, will render the warranty null and void and will exempt the
manufacturer from responsibility for any damage either to persons or things due to
5