Tecnodom NERONE EKO Notice D'utilisation page 36

6.8 FANS REMOVAL AND REPLACEMENT
Switch-off the oven and disconnect it from the electrical network before replacing the fans.
1) Unscrew manually the 2 mounting pawls of the internal baking pans supports and extract them delicately.
2) With an Allen wrench No. 5 unscrew the central screw that fixes the fans protection.
3) Remove delicately the fans protection (fans casing).
4) Unscrew the 2 nuts fixing the fans to the 2 motors and extract the 2 fans.
Replace the fans and reassemble the oven components by carrying out inversely the procedure described above.
6.9 ACTION IN CASE OF FAILUIRES OR LONG INACTIVITY
• Switch-off the oven and disconnect it from the electrical network.
• Reset all knobs of the control panel.
• Get in touch with the technical assistance (only in case of failure).
• Clean the appliance internally and externally.
If the appliance is not used for long periods, cover the oven with a piece of cloth
NERONE
1
| User and Maintenance Manual | EN
2
4
3