Crossblock Installation - Focal Utopia Beryllium Serie Manuel De L'utilisateur

Crossblock installation

Warning
When using Crossblock in bi-
wiring or biamplification, you
must remove the 4 jumpers
backside, if you don't, you can
damage amplifiers (fig. 1). Keep
them on for monowiring.
Mounting
To access to Crossover fixing holes,
remove the fixing screws (fig. 2).
Fix Crossblock with the four screws
provided on a perfectly flat area
(fig. 3). Please bear in mind that you
must keep enough space at the back
of the Crossblock to easily access
the cables.
17
English