Publicité
Les langues disponibles
Les langues disponibles
V4.1
c.
Place planks on either side of the power cord to create a
protective trench.
6.
Do not wrap cord around the tool as sharp edges may cut insulation or
cause cracks if wound too tight. Gently coil cord and either hang on a hook
or fasten with a device to keep cord together during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
IDENTIFICATION KEY
A
Control Lever Guard
B
Pusher
C
Work Table
D
Wedge
E
Lift Handle
F
Support Leg
G
Log Retaining Plates
H
Motor
I
Switch
J
Pushbutton Box
K
Wheels
L
Hydraulic Control
Lever
M
Bleed Screw
N
Max Pressure Limiting
Screw
O
Oil Drain Bolt w/ Dipstick
Visit www.princessauto.com for more information
9 Ton Electric Log Splitter
8727679
Fig. 1
11
Publicité
