Cleaning The Brushroll - shark Lift-Away NV800C Serie Instructions

MAINTENANCE - CONT.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
TIP: You can also check
for blockages in the hose
and tubes. Just remove
the floor nozzle, dust cup,
and hose and shine a
flashlight in the openings.
21
1-800-798-7398

CLEANING THE BRUSHROLL

1
Press down on the two buttons on the floor nozzle to pop
up the brushroll garage lid.
2 Lift the brushroll out by the tab on the left side. To remove
any string, hair or debris that may be wrapped around
the brushroll, use the onboard hair removal tool. The tool
is located in a compartment on the nozzle, above the
brushroll.
3 To reinstall the brushroll, return it to the brushroll garage.
Press down on the brushroll garage lid until it clicks into
place.