Stihl SE 122 Notice D'emploi page 6

English
– Using unsuitable extension cords
can be dangerous. Only use
extension cords that are approved
for outdoor use, are appropriately
labeled and have a sufficient cable
cross-section.
The plug and coupling of the
–
extension cord must be waterproof
or routed in such a way that they
cannot come into contact with water
– the plug and coupling of the
extension cord must not be
immersed in water.
Do not allow cord to rub on edges or
–
pointed or sharp objects.
– don't trap or squeeze the cord in or
under doors or windows
If cords are twisted – unplug the
–
power tool and straighten them out
– Always unwind the extension cord
completely from the cable reel to
reduce the risk of fire from
overheating.
While Working
If the power cord is dam-
aged, immediately
disconnect the plug from
the wall outlet to avoid
the risk of electric shock.
Avoid damage to the power supply cord.
Do not drive over it, pinch or tug it.
Never pull the connection cable to
disconnect it from the wall outlet. To
unplug, grasp the mains plug, not the
cable.
4
Only touch the mains plug, connection
cable and extension cord and electrical
plug connections with dry hands.
Never spray electrical devices with
water – Danger of a short circuit!
To reduce the risk of a
short circuit or electrocu-
tion, never work with the
vacuum cleaner in the
rain or in wet or very
damp locations!
In the event of imminent danger or in an
emergency – move switch to 0 .
Never leave a running unit unattended.
Do not leave the unit outdoors in the
rain.
Only operate the unit while standing. Do
not cover the unit; ensure adequate
motor ventilation.
Only vacuum with undamaged filter
element.
If foam develops or liquid leaks, end
work immediately, pull mains plug and
empty tank.
If the unit is subjected to unusual stress
for which it was not designed (e.g.,
heavy impact or a fall), always check
that it is in safe operating condition
before continuing work – see also
"Before Starting Work". Make sure the
safety devices are working properly. Do
not continue operating the machine if it
is damaged. In case of doubt, contact a
dealer.
Before leaving the unit unattended: Turn
it off and disconnect the mains plug.
After Finishing Work
Disconnect the mains plug from the wall
outlet.
Never jerk the connecting cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Always clean dust and dirt off the unit –
do not use any grease solvents for this
purpose.
Maintenance and repairs
WARNING
Before starting any work
on the machine: Always
disconnect the machine
from the mains power
supply.
– Use only high-quality spare parts.
Otherwise, there may be a risk of
accidents and damage to the unit. If
you have any questions in this
respect, consult a servicing dealer.
To avoid risks, work on the machine
–
(e. g. replacing a damaged
connecting cord) may only be
carried out by authorized dealers or
qualified electricians.
Clean plastic parts with a cloth. Harsh
detergents may damage the plastic.
Clean ventilation slots in motor housing
as needed.
The machine must be serviced regularly.
Do not attempt any maintenance or
repair work not described in the
Instruction Manual. All other work should
be carried out by a servicing dealer.
SE 122, SE 122 E