Stihl SE 122 Notice D'emploi page 5

Accessories and Spare Parts
Only use parts and accessories that are
explicitly approved for this power tool by
STIHL or are technically identical. If you
have any questions in this respect,
consult your dealer. Use only high
quality parts and accessories.
Otherwise, there is a risk of accidents
and damage to the unit.
STIHL recommends the use of original
STIHL parts and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
Never attempt to modify your power tool
in any way since this may increase the
risk of personal injury. STIHL excludes
all liability for personal injury and
damage to property caused while using
unauthorized attachments.
Applications
The unit is suitable for commercial use,
such as in hotels, schools, hospitals,
industry, stores, offices and rental
property businesses.
Vacuum dry, non-flammable materials
(dust, dirt, broken pieces of glass, wood
chips, shavings, sand, etc.) and non-
flammable liquids (wastewater, spilled
juice, etc.)
SE 122, SE 122 E
Do not vacuum hot mate-
rials (hot ashes,
flammable explosive
dust, glowing cigarette
butts, etc.), flammable
liquids (gasoline, thin-
ners, etc.) or aggressive
liquids (acids, alkalis) –
Danger of fire or
explosion!
The unit is not suitable for harmful dusts.
Other uses of the unit are not permitted
and may lead to accidents or damage to
the unit. The unit must not be modified in
any way – this may also lead to
accidents or damage to the unit.
Transporting the Unit
For safe transportation in and on
vehicles, attach the unit with straps so
that it does not slide or tip over.
Do not tilt the unit if there is liquid in the
tank.
Before transporting it, engage all locks
on the tank.
Before Starting Work
Check the unit
It must be possible to move the
–
switch to the 0 position easily
– The switch must be in the 0 position.
To reduce the risk of accidents and
personal injury, do not operate the unit if
it is not in proper condition!
Only operate the unit if all of its
components are undamaged and
securely mounted.
Before vacuuming liquids or wet
materials, remove the filter bag and
check the functioning of the float. Always
use the filter element when working.
Never attempt to modify the controls or
safety devices.
Electrical connection.
Reduce the risk of electric shock:
– Voltage and frequency of the
machine (see rating plate) and the
voltage and frequency of your
power supply must be the same.
– Examine the connecting cord,
power plug and extension cord for
damage. Damaged cords,
couplings and plugs or connecting
cords that do not comply with the
regulations must not be used
Only connect electrical connector to
–
a properly installed wall outlet.
– Only use extension cords that
comply with the regulations for the
intended application.
– Check that the insulation of the
connection cable, extension cord,
plug and coupling is in good
condition.
Position the connection cable and
extension cord correctly:
– Check minimum cross section of
wires (wire gauge) – see
"Connecting to Power Supply".
– To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others.
English
3