Cleaning The Filter Element; Replacing The Filter Element - Stihl SE 122 Notice D'emploi

English

Cleaning the filter element

1
Squeeze sleeve (1) of suction hose
N
(arrows) together to release it
Remove suction hose
N
Switch on machine
N
Seal the hose at the sleeve by firmly
N
pressing the sleeve against the flat
surface beside the switch (as shown
in picture)
Press the filter cleaning button 3
N
times
Dust deposits are removed from the filter
element.
10

Replacing the filter element

1
2
Unplug the power plug from the
N
socket
Remove upper part of vacuum
N
cleaner and turn it over
Unscrew supporting cage for
N
filter (1)
Remove filter element (2) and
N
dispose of it in accordance with the
statutory regulations
Fit new filter element in the reverse
N
sequence of steps
Check correct operation of the float:
N
the float must move easily when the
supporting cage for the filter is
turned over.
Refit upper part of the vacuum
N
cleaner
NOTICE
Never use the vacuum cleaner with a
damaged filter element or without the
filter element.
SE 122, SE 122 E