Cleaning The Filter Element; Replacing The Filter Element - Stihl SE 62 Notice D'emploi

Close the container
Clean the edge of the container
N
Fit the upper part of the vacuum
N
cleaner – see "Assembling the
machine"
before fitting the suction hose:
N
Clean the sleeve of the suction hose
and intake port
SE 62

Cleaning the filter element

Close slide on hand tube
N
Switch on machine
N
Press opening of hand tube firmly
N
against a level surface or close by
hand
Press the button (1) to clean filter 3x
N
Dust deposits are removed from the filter
element.

Replacing the filter element

1
Unplug the power plug from the
N
socket
Remove upper part of vacuum
N
cleaner and turn it over
Turn the cover (1) in the direction of
N
the arrow and remove it
Remove filter element (2) and
N
dispose of it in accordance with the
local regulations
Check correct operation of the float:
N
the float must move easily when the
upper part of the vacuum cleaner is
turned over
Fit new filter element in the reverse
N
sequence of steps
Refit upper part of the vacuum
N
cleaner
English
1
2
11