Opening Range Top (Zrrsc8050 Only); Removing Coil Surface Elements - Amana ZRRSC8050 Serie Manuel Du Propriétaire

Opening Range Top (ZRRSC8050 Only)

WARNING
To avoid risk of electrical shock, disconnect electrical
supply to range before cleaning.
1. Grasp front of range top and pull up and out.
• Pivoting hinge lifts range top up and out.
• Counter top and range top can be damaged if range
top is only pushed up and back.
2. Prop range top with range top support located behind
control panel.

Removing Coil Surface Elements

To avoid risk of personal injury, do not touch surface
elements or area near elements without checking for
heat. Surface elements may be dark in color even
when hot. Hold hand above surface element to detect
heat before touching. Areas near elements may be
hot enough to burn.
1. Hold hand above surface element to detect heat
before touching. Do not touch if heat is detected.
2. Grasp element at end opposite from receptacle and
lift approximately an inch.
• Element clip holds surface element in place.
3. Pull surface element out of receptacle and set aside.
4. Reverse procedure to reassemble.
Pivoting
Hinge
26
WARNING
S u r fa c e E le m e n t
C lip
R e c e p ta c le
B u r n e r B o w l