Self-Cleaning; Delayed Self-Cleaning - Amana ZRRSC8050 Serie Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Self-Cleaning

• A small amount of smoke is normal when cleaning.
Excessive smoke may indicate a failed gasket or
too much food residue has been left in oven.
• Clean oven before it gets too dirty. Wipe up large
spills before self-cleaning.
• Do not use cleaning cycle if oven light cover is not
properly in place.
WARNING
To avoid risk of fire, clean excess spills from oven
interior.
CAUTION
To avoid risk of personal injury, do not touch oven vents
or areas around vents during self-cleaning. These areas
can become hot enough to cause burns.
1. Prepare oven for self-cleaning.
• Remove oven racks and all cooking utensils from
oven.
• Clean excess spills from oven interior.
• Remove items from range top and backguard.
These areas can become hot during self-cleaning
cycle.
2. Press CLEAN pad.
• "CLN", "TIME", and "--:--" display.
3. Press
or
pad to adjust cleaning time.
• "3:00" displays when
• Increase or decrease cleaning time by 5 minute
increments.
• Clean can be set from 2 to 4 hours. Minimum
recommended cleaning time is 3 hours.
• Oven begins to clean. "HR", "CLN, "TIME",
"CLEAN", "LOCKED", and "
flashes in display when automatic door latch is
locking.
• When cleaning time has elapsed, end of cycle
signal sounds, oven automatically turns off and
display returns to time of day. End of cycle signal
sounds.
4. Press OVEN CANCEL pad when finished.
• When oven has cooled to a safe temperature, door
latch opens and "LOCKED" light flashes while
opening. When oven has cooled enough to open
door "LOCKED" light no longer displays and door
can be opened.
Interrupt Self-Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, door
will unlock and can be opened.
or
is pressed.
" lights. "LOCKED"
O
N

Delayed Self-Cleaning

• A small amount of smoke is normal when cleaning.
Excessive smoke may indicate there is a faulty
gasket or too much food residue has been left in
oven.
• Clean oven before it gets too dirty. Wipe up large
spills before self-cleaning.
• Do not use cleaning cycle if oven light cover is not
properly in place.
WARNING
To avoid risk of fire, clean excess spills from oven
interior.
CAUTION
To avoid risk of personal injury, do not touch oven vents
or areas around vents during self-cleaning. These areas
can become hot enough to cause burns.
1. Prepare oven for self-cleaning.
• Remove oven racks and all cooking utensils from
oven.
• Clean excess spills from oven interior.
• Remove items from range top and backguard.
These areas can become hot during self-cleaning
cycle.
2. Press CLEAN pad.
• "CLN", "TIME", and "--:--" display.
3. Press
or
pad until desired amount of cleaning
time is displayed.
• "3:00" displays when
• Increase or decrease cleaning time in 5 minute
increments.
• Clean can be set from 2 to 4 hours. Minimum
recommended cleaning time is 3 hours.
4. Press STOP TIME pad.
16
or
is pressed.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Zrtsc8650 serie

Table des Matières