Depaepe HD DECT Notice D'utilisation page 12

oVérifiez les commutateurs de compatibilité
-
If you can't pair your headset and the BLUE pairing LED is continually blinking, you need
to reset the headset. Charge the battery for about 10 minutes, Separate the battery pack from the
headset and then put it back.
- When you hear the low-battery alarm, charge the battery pack immediately.
-
If you can hear click-sound when you press the on/off button, it may be low battery status or
unpaired status.
-
If you have no sound with fully loaded battery:
Check the PC/TEL button
o
Please check the cable connection between Base unit and Phone.
o
Please check the compatibility switch. Adjust compatibility switch until you can hear the
o
dial tone.
Niveau de sécurité TRT3 / TNV3 Security level
Ce terminal est conçu pour être raccordé au réseau d'énergie 220 V 50 Hz (Tension excessive) au
travers d'un bloc secteur fourni avec l'appareil et derrière une poste téléphonique, au sens de la
norme EN 60950-1 : 2006
This unit can be connected to TNV3 access in conformity to EN
60950-1 : 2006
12/13