Installation In Interior Doors; Determine Cat Door Location; Prepare Door - Petsafe CD10-050-11 Guide D'installation

Installation in Interior Doors

Step 1

Determine Cat Door Location

1A. Measure and mark your cat's shoulder height on one side of
door.
1B. Determine location for the cat door. Draw a vertical center line
through the shoulder height line using a level.
If homeowner's door or other application is
not level, the cat door must be marked level to
swing properly.
Step 2

Prepare Door

2A. Remove door by removing door hinge pins.
2B. Place on a raised level surface such as saw horses. Place
marked side of door facing up.
Helpful Tip: Clamp down the door to prevent it from moving.
NOTE: The cat door can be installed with the door hanging
based on your skill level.
2C. Match the marked lines on the door with the shoulder and center lines on the template.
Tape template in place and trace template. Make sure to trace underneath tape and
connect the corners. Remove the template and any excess tape from the door.
When applying cutting template there
should be a minimum of 3" between the
bottom and sides of the door and the outer
edge of the cutting template to maintain
the structural integrity of the door.
www.petsafe.net
1A
1B
2A
2B
2C
5