Makita VC002GL Manuel D'instruction page 4

Disconnect the battery pack from
2.
the appliance before making any
adjustments, changing accessories,
or storing appliance. Such preventive
safety measures reduce the risk of
starting the appliance accidentally.
Recharge only with the charger
3.
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
Use appliances only with specifi-
4.
cally designated battery packs. Use
of any other battery packs may create
a risk of injury and fire.
When battery pack is not in use,
5.
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid
6.
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If liq-
uid contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or appli-
7.
ance that is damaged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior
resulting in fire, explosion or risk of
injury.
Do not expose a battery pack or
8.
appliance to fire or excessive tem-
perature. Exposure to fire or tem-
perature above 130 °C may cause
explosion.
Follow all charging instructions
9.
and do not charge the battery
pack or appliance outside of the
temperature range specified in the
instructions. Charging improperly or
at temperatures outside of the speci-
fied range may damage the battery and
increase the risk of fire.
Have servicing performed by a quali-
10.
fied repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
Do not modify or attempt to repair
11.
the appliance or the battery pack
except as indicated in the instruc-
tions for use and care.
SAVE THESE
INSTRUCTIONS.
This appliance is intended for commer-
cial use.
Symbols
The followings show the symbols used for
tool.
volts
direct current
Take particular care and
attention.
Never stand on the cleaner.
Important safety
instructions for
battery cartridge
Before using battery cartridge, read
1.
all instructions and cautionary mark-
ings on (1) battery charger, (2) bat-
tery, and (3) product using battery.
Do not disassemble or tamper the
2.
battery cartridge. It may result in a
fire, excessive heat, or explosion.
If operating time has become
3.
excessively shorter, stop operating
immediately. It may result in a risk
of overheating, possible burns and
even an explosion.
If electrolyte gets into your eyes,
4.
rinse them out with clear water and
seek medical attention right away. It
may result in loss of your eyesight.
4 ENGLISH