The Irob System En; Nameplate; Signs And Symbols Used En; Symbol Description - Abicor Binzel iROB Cool Mode D'emploi

iROB Cool
3.3 The iROB system
Equipment and accessories of the iROB system are shown in the following table.
iROB Pulse
iROB Feed 22
iROB Feed MP (MasterPull)
iROB Cool
iROB Control
iROB Bracket
iROB Clamp
iROB Spool
iROB RI 1000/2000/3000
MF1
MP
WHPPI
Tab. 6 Abbreviations

3.4 Nameplate

The coolant recirculator is labelled with a nameplate on the back of the housing as follows:
Fig. 2
When making any inquiries, please remember the following information:
• Device type, device number
3.5 Signs and symbols used
In the operating instructions, the following signs and symbols are used:

Symbol Description

•

1
BAL.0332.0 • 2017-08-31
Robot welding power source
Wire feeder
Connection box for MF1 MasterPull
Coolant recirculator for the robot welding power source
Remote control for the set up of the robot welding power source
Mounting platform for the wire feeder
Fixture for intermediate cable assembly on the robot
Fixture and support for K300 wire spools on the robot
Robot interface
Drive unit (master) size 1 = roll ø 20 mm
MF1 MasterPull
Designates the changeable body in the push-pull design
Nameplate
List of symbols for action commands and enumerations
Cross reference symbol refers to detailed, supplementary or further information
Action(s) described in the text to be carried out in succession
3 Product description
EN - 7