Controls & Features - Power Fist 8900797 Manuel D'utilisation

Controls & Features
CONTROLS
1. Fuel Valve
The fuel valve opens and closes the passage between the fuel tank and the carburetor.
The fuel valve must be in the ON position for the engine to run. When the engine is not
in use, be sure the fuel valve is in the OFF position to prevent carburetor flooding and
to reduce the possibility of fuel leakage.
2. Engine ON/OFF Switch (per engine specification)
The engine switch enables and disables the ignition system. Turn the engine switch to
the ON position to start the engine. Turn the engine switch to the OFF position to stop
the engine.
3. Choke Lever
The choke lever opens and closes the choke valve in the carburetor. The "ON" position
enriches the fuel mixture which makes it easier when starting a cold engine. The
opposite position provides the correct fuel mixture for operation after engine warms up.
4. Throttle Lever (per engine specification)
The throttle lever controls engine speed (RPMs). Moving the throttle lever in the
directions shown makes the engine run faster or slower. (Non-generator applications.)
5. Recoil Starter Grip
Pulling the starter grip operates the recoil starter to crank the engine. Always grip snugly
and have your body positioned properly when pulling. Keep thumb on the end of the
handle in case of kick-back.
WARNING
Do not touch hot
sections of engine.
The hot sections
of the engine can
cause severe burns.
3
1
4
5
Liquid Combustion Technology, LLC Engines Manual 5
2